What is the composition of 100MnCrW4 Cold Work Tool Steel?

Published composition ranges are not available for 100MnCrW4 Cold Work Tool Steel in this record. PARTIAL - parsed from a truncated 500-char source excerpt; the element set is INCOMPLETE and must NOT be used for validation, specification or purchasing

What standards cover 100MnCrW4 Cold Work Tool Steel?

The governing standards for 100MnCrW4 Cold Work Tool Steel include DIN 1.2510, EN ISO 4957. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is 100MnCrW4 Cold Work Tool Steel used for?

This alloy is used in applications demanding the property set described in its family: tool_steel.

How do I verify a mill certificate for 100MnCrW4 Cold Work Tool Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

What UNS number is assigned to 100MnCrW4 Cold Work Tool Steel?

No UNS number is assigned; identify by the AMS or ASTM grade on the certificate.

100MnCrW4 Cold Work Tool Steel

tool_steel

Validate composition

Quick answer

100MnCrW4 Cold Work Tool Steel is a tool steel specified by DIN 1.2510, EN ISO 4957. Typical composition: .

A low-alloy cold work tool steel, also known as DIN 1.2510, characterized by good toughness, wear resistance, and dimensional stability after heat treatment. It is suitable for a variety of cutting and forming applications.

Applicable Standards

DIN 1.2510
EN ISO 4957

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →