What is the composition of ASTM A1011 SS Grade 50 Structural Steel?

Published composition ranges are not available for ASTM A1011 SS Grade 50 Structural Steel in this record. PARTIAL - parsed from a truncated 500-char source excerpt; the element set is INCOMPLETE and must NOT be used for validation, specification or purchasing

What standards cover ASTM A1011 SS Grade 50 Structural Steel?

The governing standards for ASTM A1011 SS Grade 50 Structural Steel include ASTM A1011/A1011M. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is ASTM A1011 SS Grade 50 Structural Steel used for?

This alloy is used in applications demanding the property set described in its family: low_alloy_steel.

How do I verify a mill certificate for ASTM A1011 SS Grade 50 Structural Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

What UNS number is assigned to ASTM A1011 SS Grade 50 Structural Steel?

No UNS number is assigned; identify by the AMS or ASTM grade on the certificate.

ASTM A1011 SS Grade 50 Structural Steel

low_alloy_steel

Validate composition

Quick answer

ASTM A1011 SS Grade 50 Structural Steel is a low alloy steel specified by ASTM A1011/A1011M. Typical composition: .

A hot-rolled carbon structural steel sheet and strip, offering a minimum yield strength of 50 ksi (345 MPa), commonly used in general structural applications where good strength and formability are required.

Applicable Standards

ASTM A1011/A1011M

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →