What is the composition of CA15 Cast Martensitic Stainless Steel?

Published composition ranges are not available for CA15 Cast Martensitic Stainless Steel in this record. The source entry did not carry a verified composition.

What standards cover CA15 Cast Martensitic Stainless Steel?

The governing standards for CA15 Cast Martensitic Stainless Steel include ASTM A743, ASTM A744, UNS J91150. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is CA15 Cast Martensitic Stainless Steel used for?

This alloy is used in applications demanding the property set described in its family: stainless.

How do I verify a mill certificate for CA15 Cast Martensitic Stainless Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

CA15 Cast Martensitic Stainless Steel

UNS J91150 stainless

Validate composition

Quick answer

CA15 Cast Martensitic Stainless Steel is a stainless specified by ASTM A743, ASTM A744, UNS J91150. Typical composition: .

CA15 is a cast martensitic stainless steel, equivalent to wrought Type 410, known for its good strength, hardness, and wear resistance. It is typically used in applications requiring moderate corrosion resistance and high mechanical properties.

Applicable Standards

ASTM A743
ASTM A744
UNS J91150

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →