What is the composition of EN 10025 S235JR Structural Steel?

Published composition ranges are not available for EN 10025 S235JR Structural Steel in this record. PARTIAL - parsed from a truncated 500-char source excerpt; the element set is INCOMPLETE and must NOT be used for validation, specification or purchasing

What standards cover EN 10025 S235JR Structural Steel?

The governing standards for EN 10025 S235JR Structural Steel include EN 10025-2. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is EN 10025 S235JR Structural Steel used for?

This alloy is used in applications demanding the property set described in its family: low_alloy_steel.

How do I verify a mill certificate for EN 10025 S235JR Structural Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

What UNS number is assigned to EN 10025 S235JR Structural Steel?

No UNS number is assigned; identify by the AMS or ASTM grade on the certificate.

EN 10025 S235JR Structural Steel

low_alloy_steel

Validate composition

Quick answer

EN 10025 S235JR Structural Steel is a low alloy steel specified by EN 10025-2. Typical composition: .

S235JR is a non-alloy structural steel grade specified under the European standard EN 10025-2. It is widely used in construction and general engineering for its good weldability and formability, offering a minimum yield strength of 235 MPa.

Applicable Standards

EN 10025-2

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →