What is the composition of EN 10025 S275JR Structural Steel?

Published composition ranges are not available for EN 10025 S275JR Structural Steel in this record. The source entry did not carry a verified composition.

What standards cover EN 10025 S275JR Structural Steel?

The governing standards for EN 10025 S275JR Structural Steel include EN 10025-2. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is EN 10025 S275JR Structural Steel used for?

This alloy is used in applications demanding the property set described in its family: low_alloy_steel.

How do I verify a mill certificate for EN 10025 S275JR Structural Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

What UNS number is assigned to EN 10025 S275JR Structural Steel?

No UNS number is assigned; identify by the AMS or ASTM grade on the certificate.

EN 10025 S275JR Structural Steel

low_alloy_steel

Validate composition

Quick answer

EN 10025 S275JR Structural Steel is a low alloy steel specified by EN 10025-2. Typical composition: .

A non-alloy structural steel grade specified in the European standard EN 10025-2, offering good weldability and formability for general construction and engineering purposes. The 'JR' designation indicates a minimum impact energy of 27 Joules at room temperature (20°C).

Applicable Standards

EN 10025-2

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →