What standards cover EN 10025 S460M Thermomechanically Rolled Structural Steel?

The governing standards for EN 10025 S460M Thermomechanically Rolled Structural Steel include EN 10025-4. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

How do I verify a mill certificate for EN 10025 S460M Thermomechanically Rolled Structural Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

What UNS number is assigned to EN 10025 S460M Thermomechanically Rolled Structural Steel?

No UNS number is assigned; identify by the AMS or ASTM grade on the certificate.

EN 10025 S460M Thermomechanically Rolled Structural Steel

Q: What is the composition of EN 10025 S460M Thermomechanically Rolled Structural Steel?

Published composition ranges are not available for EN 10025 S460M Thermomechanically Rolled Structural Steel in this record. The source entry did not carry a verified composition.

Q: What is EN 10025 S460M Thermomechanically Rolled Structural Steel used for?

This alloy is used in applications demanding the property set described in its family: low_alloy_steel.

low_alloy_steel

Validate composition

Quick answer

EN 10025 S460M Thermomechanically Rolled Structural Steel is a low alloy steel specified by EN 10025-4. Typical composition: .

S460M is a high-strength structural steel with a minimum yield strength of 460 MPa, produced by thermomechanical rolling. This process results in a fine grain structure, offering excellent weldability and good toughness, even at low temperatures.

Applicable Standards

EN 10025-4

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →