What is the composition of EN 13262 ER7 Wheel Steel?

Published composition ranges are not available for EN 13262 ER7 Wheel Steel in this record. PARTIAL - parsed from a truncated 500-char source excerpt; the element set is INCOMPLETE and must NOT be used for validation, specification or purchasing

What standards cover EN 13262 ER7 Wheel Steel?

The governing standards for EN 13262 ER7 Wheel Steel include EN 13262, UIC 812-3. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is EN 13262 ER7 Wheel Steel used for?

This alloy is used in applications demanding the property set described in its family: low_alloy_steel.

How do I verify a mill certificate for EN 13262 ER7 Wheel Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

What UNS number is assigned to EN 13262 ER7 Wheel Steel?

No UNS number is assigned; identify by the AMS or ASTM grade on the certificate.

EN 13262 ER7 Wheel Steel

low_alloy_steel

Validate composition

Quick answer

EN 13262 ER7 Wheel Steel is a low alloy steel specified by EN 13262, UIC 812-3. Typical composition: .

ER7 is a medium carbon steel grade specified in European standards for railway applications, primarily used for the manufacture of railway wheels. It offers a good balance of strength, wear resistance, and toughness required for demanding service conditions.

Applicable Standards

EN 13262
UIC 812-3

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →