What is the composition of SAE 4037 Molybdenum Steel?

Published composition ranges are not available for SAE 4037 Molybdenum Steel in this record. PARTIAL - parsed from a truncated 500-char source excerpt; the element set is INCOMPLETE and must NOT be used for validation, specification or purchasing

What standards cover SAE 4037 Molybdenum Steel?

The governing standards for SAE 4037 Molybdenum Steel include SAE J404, ASTM A322. Mill certificates typically call out the most specific AMS or ASTM number applicable to the product form.

What is SAE 4037 Molybdenum Steel used for?

This alloy is used in applications demanding the property set described in its family: low_alloy_steel.

How do I verify a mill certificate for SAE 4037 Molybdenum Steel?

Compare each element value on the certificate against the min/max ranges in the spec table above. Paste the values into the SpecBase validator to get an automated pass/fail check.

SAE 4037 Molybdenum Steel

UNS G40370 low_alloy_steel

Validate composition

Quick answer

SAE 4037 Molybdenum Steel is a low alloy steel specified by SAE J404, ASTM A322. Typical composition: .

SAE 4037 is a medium carbon molybdenum alloy steel, known for its good strength and toughness. It is often used in applications requiring moderate hardenability.

Applicable Standards

SAE J404
ASTM A322

Frequently asked questions

Validate my sample against this spec Identify unknown alloy ← Back to all alloys

Need a tamper-evident certificate for this alloy?

Immutable, timestamped, and shareable with your customer or auditor.

Start free pilot →